Understanding Why a Plumber is Necessary to Install Your Dishwasher

Book Service Now

From carrying a dishwasher into your home to connecting the water links, mounting a dish washer can occupy to five hrs. If you don't have the right tools, it could take even longer. To make your life less complicated and also to prevent mounting a dishwasher improperly, we advise working with an expert plumber. A plumber will have the right devices accessible and also can install your brand-new dishwasher in under two hrs. Keep reviewing to find out why you should hire a plumber if you're not quite convinced yet.

A Plumber Can Evaluate the Supply Lines

A supply line, especially a dish washer adapter, attaches the dish washer to a water source. A plumber can make sure that the line is suitable with both your dishwasher and also water resource if you get a new supply line. A specialist plumber can inspect it to guarantee that it's in excellent condition and does not have any leakages if you determine to make use of an existing supply line.

An Improper Installment Can Void the Dishwasher's Guarantee

Before mounting a dishwashing machine on your own, you must read the guarantee thoroughly. Unless you are convenient as well as have experience installing dishwashing machines, you need to hire a plumber so you do not risk your warranty.

Setting Up a Dishwashing Machine Calls For a Selection of Tools

If you do not have a range of devices on hand, you may require to make a journey to Lowe's or House Depot. To mount a dishwasher, you require the adhering to tools: pliers, a flexible wrench, a collection of screwdrivers, a tube cutter, and opening saws.

Not Mounting Your Dishwasher Properly Can Cause a Hill of Issues

Not only can setting up a dishwashing machine appropriately invalidate your warranty, however it can also create a mess. If you do not set up the supply line properly, you might deal with leakages-- or also worse, a flooding. You could additionally experience a "water hammer"-- when the water runs as well promptly via your pipes and creates loud drinking sounds. If you improperly mount your dish washer to the garbage disposal, you may discover pungent smells or have residue on your meals.

A Plumber Can Finish the Task Affordably as well as Swiftly

A plumber can install your dishwasher in one to two hrs. The typical plumber will not charge even more than a pair of hundred dollars to mount your dishwasher.
From transporting a dishwasher into your house to attaching the water connections, mounting a dishwasher can take up to 5 hrs. To make your life less complicated and to avoid installing a dishwashing machine inaccurately, we advise hiring a professional plumber. A plumber will certainly have the right tools on hand and also can install your new dishwasher in under two hours. A supply line, specifically a dishwashing machine port, links the dishwashing machine to a water source. Unless you are helpful as well as have experience setting up dishwashers, you should hire a plumber so you do not risk your guarantee.

How To Install A Dishwasher

Installing A Dishwasher Yourself

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.

Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

Steps Involved In Dishwasher Installation

Step One: Gather the Necessary Supplies

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

A screwdriver

• A hose clamp

• Duct tape (optional)

• A brass fitting

• Teflon tape

• A pair of pliers

• An adjustable wrench

• A drill

• Braided steel water line

• A pair of rubber hand gloves (optional)

• Wire nuts

Step Two: Take Safety Measures

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

Step Three: Remove the Old Dishwasher

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.

Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.

Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.

With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.

Skip this step if you are having a dishwasher installed for the first time in your kitchen.

Step Four: Install the New Dishwasher

Connect the Water Supply

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.

Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

Attach the Drain Line

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

Slide the Dishwasher into Place

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.

Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher

Book Service Now